Manohar Posted July 14, 2011 Posted July 14, 2011 HI,Recently I have installed WAsP 10.1 release-B.When I tried to run one of project, then it is giving this error. Please suggest possible solution.
Niels Gylling Mortensen Posted July 14, 2011 Posted July 14, 2011 There's a WAsP 10.1 release C now, see http://www.risoe.dtu.dk/WAsP/Download/Software/WAsP10_Installation.aspx. Could you possibly mail the entire error message to waspsupport@risoe.dtu.dk?
Manohar Posted July 15, 2011 Posted July 15, 2011 I have tried in WAsP 10.1 Release-C but the same error message is coming.Below is the entire Error messageException report produced at 2011-07-15 09:26:50Shoreline boundary exceeded raised at: 2011-07-15 09:26:20 2011-07-15 09:26:20: Message added: Could not perform the predicted wind climate calculation for a turbine site 2011-07-15 09:26:20: Exception raised in: Rvea0134:cTurbineSite:CalculatePredictedWindClimate 2011-07-15 09:26:20: Message added: Could not perform the turbine site calculation 2011-07-15 09:26:20: Exception raised in: Rvea0134:cTurbineSite:Calculate 2011-07-15 09:26:20: Message added: Could not ensure that the climate predictions for all the wind farm's sites are calculated 2011-07-15 09:26:20: Exception raised in: Rvea0134:cUnstructuredTurbineSiteGroup:EnsureAllSitesAreCalculated 2011-07-15 09:26:20: Message added: Could not calculate the wind farm 2011-07-15 09:26:20: Exception raised in: Rvea0134:cUnstructuredTurbineSiteGroup:Calculate 2011-07-15 09:26:20: Message added: Unable to perform all the pending calculations 2011-07-15 09:26:20: Exception raised in: WAsP:cCalculationExpert:DoAllPendingCalculations 2011-07-15 09:26:20: Message added: Could not do all calculations for a member 2011-07-15 09:26:20: Exception raised in: WAsP:cProjectCalculator:DoAllJobs 2011-07-15 09:26:20: Message added: Could not process the menu action 2011-07-15 09:26:20: Exception raised in: WAsP:cMemberPopupMenuHeadToolMediator:ProcessMenuClick Latest thread started in: WAsP:fProgressMonitor:Form_Load
josemijauregui Posted July 24, 2011 Posted July 24, 2011 Hi!This is Jose from Nayxa,We're having the same problems with WAsP 10.1 release CException report produced at 2011-07-24 20:00:48Shoreline boundary exceeded raised at: 2011-07-24 20:00:45 2011-07-24 20:00:45: Message added: A problem arose while calculating the grid site with co-ordinates (540000,4138025) 2011-07-24 20:00:45: Exception raised in: Rvea0134:cResourceGridCalculator:DoOneSite 2011-07-24 20:00:45: Message added: Could not perform a resource grid calculation 2011-07-24 20:00:45: Exception raised in: Rvea0134:cResourceGridCalculator:CalculateResults 2011-07-24 20:00:45: Message added: Could not calculate the results for the resource grid 2011-07-24 20:00:45: Exception raised in: Rvea0134: cResourceGridCalculator:CalculateResults 2011-07-24 20:00:45: Message added: Unable to perform all the pending calculations 2011-07-24 20:00:45: Exception raised in: WAsP:cCalculationExpert:DoAllPendingCalculations 2011-07-24 20:00:45: Message added: Could not do all calculations for a member 2011-07-24 20:00:45: Exception raised in: WAsP:cProjectCalculator:DoAllJobs 2011-07-24 20:00:45: Message added: Could not process the menu action 2011-07-24 20:00:45: Exception raised in: WAsP:cMemberPopupMenuHeadToolMediator:ProcessMenuClick Latest thread started in: WAsP:fProgressMonitor:Form_LoadThanks,RegardsJose
Niels Gylling Mortensen Posted July 24, 2011 Posted July 24, 2011 Haven't seen this error message before... but I wonder if it has to do with this: If WAsP does not find an elevation or roughness contour within 20 km of a site, it can come up with a error.This distance (calculation radius) is governed by one of the parameters in the projects "Edit project configuration…" menu. If you go to "Edit project configuration… / WAsP wind modeling / Max. interpolation radius in BZ model", you can change this radius to, say, 25,000 m or even more. Now your resource grid or wind farm will (hopefully) calculate. You could also make an elevation/roughness contour in the area where the problem is, e.g. around and close to the wind farm site. – This is what I do all the time: make a roughness / elevation line (with values 0, 0, 0) at the border of the offshore wind farm site.
josemijauregui Posted July 25, 2011 Posted July 25, 2011 Hi Niels,Thank you for your answer.The problem is that the project where I'm doing the calculation is at some mountains of Spain, with a contour map and a lot of height contours.I've unistalled the current version of WAsP and re-installed a previous version, WAsP10G-SetupBuild214.zip, and calculations work perfectly.The resource grids can be calculated with no problem.I don't really understand the error of the last version, because the project is not situated near the sea.ThanksJose
Niels Gylling Mortensen Posted July 25, 2011 Posted July 25, 2011 Hi Jose,Ok, it was a long shot, but I thought I'd give it a go. It seems to be a problem for the programming team; I'll let them know.
Duncan Posted July 26, 2011 Posted July 26, 2011 Hi Manohar, Jose,This error is actually due to a software configuration problem. We are making a fix which should be ready next week. We can send it out to anyone who is affected, and this fix will eventually be included in an update to the software. If you're not seeing this error message, then you're not affected.Please email me duncan(at)wasptechnical.dk or Niko niko(at)wasptechnical.dk for further assistance.
josemijauregui Posted July 26, 2011 Posted July 26, 2011 Hi Niels and Duncan,Thank you very much for your answer.Duncan, it'd be great if you could send the version when it's ready, I'll keep an eye at the WAsP download site.Anyway you have my mail, josemiguel.jauregui@nayxa.com, so in case there's some news before you're planning to upload a new version in the WAsP site please let me know.Thanks a lot to both of you,RegardsJose
Burock82 Posted August 16, 2011 Posted August 16, 2011 I have same problem too. Has new version loaded to WAsP site to solve problem?
Niko Posted August 16, 2011 Posted August 16, 2011 Hi Burock82,We have a new build of WAsP which should fix this problem. It's not public release yet but I can send a download link to you by email.We are also trying to diagnose this problem so could you please email me the "WAsP on this computer" - report. You can get it from the Help menu of WAsP.My email address is niko.rosvall [at] wasptechnical.dkCheers,Niko
ra1nb0w Posted November 25, 2011 Posted November 25, 2011 Hi Niko,I have the same problem with "Shoreline boundary exceeded" could you send me a download link for the WAsP fix?I am using the WAsP-10-1-ReleaseC-Build100.Following is the Error logCould not do all calculations for a member because ... unable to perform all the unnecessary but possible calculations because ... could not calculate the results for the resource grid because ... could not perform a resource grid calculation because ... a problem arose while calculating the grid site with co-ordinates (376150,4544950) because ... the system reported that: 'Shoreline boundary exceeded.'My email is gkatsoulis@terna.grKind regardsGeorge
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now