WAT2Launcher.wes2

[Server]

Good morning everyone.
Today i was working with Wasp when attempting to move some datas from engineering to WAT me and the following error came

Exception report produced at 2011-01-18 10:16:21

El subíndice está fuera del intervalo raised at: 2011-01-18 10:10:36
2011-01-18 10:10:36: Message added: Failed to return a value for a cell in the grid map
2011-01-18 10:10:36: Exception raised in: Rvea0086:cRealGridMap:CellValue
2011-01-18 10:10:36: Message added: Failed to get interpolated point value from a grid map
2011-01-18 10:10:36: Exception raised in: Rvea0086:cRealGridMap:InterpolatedPointValue
2011-01-18 10:10:36: Message added: Could not return a value for a point in the grid map
2011-01-18 10:10:36: Exception raised in: Rvea0086:cRealGridMap:PointValue
2011-01-18 10:10:36: Message added: Failed to execute the script WAT2Launcher.wes2 Modified: 2009-11-13 06:52:30
2011-01-18 10:10:36: Exception raised in: WAsP Engineering:cScripter:Execute
2011-01-18 10:10:36: Message added: Could not invoke the script
2011-01-18 10:10:36: Exception raised in: WAsP Engineering:cMainform:InvokeScript
Latest thread started in: WAsP Engineering:cProgressMonitor:Class_Terminate

I'm trying to think why that error.

Can anyone help me

My Best Regards

[Duncan]

Is it only this one project, or are you seeing the same error with other projects too?

[Server]

Its only in this proyect.

[Duncan]

I guess you should send it to us to have a look, then. Could you do that? wengsupport@risoe.dk.

[Server]

do it

[Morten]

Users with similar problems might like to read the explanation we found for Server after contacting WEngSupport:

WAT2Launcher tries to extract a grid map around the turbine sites, which extends 25 time the hub height from any turbine site or approximately 2.5 km in this project. The likely reason for the script failure is that turbines are less than 1 km from the edge of the project map, so it is not possible for the script to extract the data needed for the terrain assessments in WAT. If you don’t care about terrain corrections, you could try to work with WAT2Excel instead. It would however be best if you could find a better map for your WEng project.

Read more about maps in WEng at http://www.wasp.dk/Support/FAQ/WENGmaps.html

[Server]

In the end this was the problem, the 2.5 km away.

Got to get a larger part of the map and the problem was solved.

Thank you very much and good work